TLC3704CDRG4 Overview
In the package, you will find a SOIC-case to contain the op amp ic. A Tape and Reel case is used for delivering the op amp. During the past two weeks, there have been close to 14 terminations. A total of 14 pins are located on this board. This linear amplifier should be powered by an 5V battery. This particular linear amplifier is a type of Comparator device, to be precise. The op amp ic has an array of 14 pins on it. Op amp rates 5mV as input offset voltage. On the buffer amps, there are 4 channels that can be used. Buffer amplifier produces TTL signals, which is one of its many benefits. To operate this buffer amplifier, the temperature must not be lower than -40°C. A temperature greater than 85°C should not be used for the operation of buffer amplifier. The operating supply voltage of the buffer op amp is rated at 5V. This electric component can work from a voltage of under 16V as far as supply voltage is concerned. A voltage of 3V or higher is recommended for the linear amplifier's supply voltage. The current is quiescent at 100μA.
TLC3704CDRG4 Features
14 Pins
supply voltage of 5V
Output Type: TTL
TLC3704CDRG4 Applications
There are a lot of Texas Instruments
TLC3704CDRG4 Instrumentational OP Amps applications.
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video computer boards
