TL7705ACPSR Overview
There are 8 terminals on this power management that allow it to be mounted. There is a Tape & Reel (TR)-packaging method applied to IC management. Please refer to this PMIC for 1 functions. A series of 1 channels can be found on this supervisor. In this PMIC, you can find 8-SOIC (0.209, 5.30mm Width) functions for your reference. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. According to the specification, the package's peak reflow temperature is specified to be 260. A supply voltage of 5V is used to conduct the PMIC chip. IC management is possible to find a succession of 1 voltages that have been checked. A IC power such as this can be classified as a Power Management Circuits power management system. A total of 8 pins are located on this power management. This power management has 8 pins. It is recommended that Vsup should not be less than 3.5V for this IC power. There should be no more than 18V volts of supply voltage (Vsup) in this power management. Surface Mount is the recommended mounting type. We recommend setting the supervisors to 0°C~70°C TA degrees. While this power management is operating, it will output Complementary as the output voltage. For this power management, there is an 1.8mA volt supply current. You can always use TL7705, the base supervisor number, to search for similar PMICs of the manufacturer. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 3mA.
TL7705ACPSR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 3.5V
1.8mA operating supply current
TL7705ACPSR Applications
There are a lot of Texas Instruments TL7705ACPSR Voltage Supervisors applications.
- Multi-voltage system
- Computer applications
- Embedded computing
- Medical-specific isolation transformer
- DSP
- Telecommunications equipment
- Electronics installed in the vehicle
- Battery cars
- Analog circuit
- Personal computers
