Name: BD4940FVE-TR
Brand: ROHM Semiconductor
SKU: BD4940FVE-TR
Price: 0.23000 USD
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Factory Lead Time	9 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	SOT-665
Number of Pins	5
Operating Temperature	-40°C~105°C TA
Packaging	Tape & Reel (TR)
Published	2013
Series	BD49xxx
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	5
ECCN Code	EAR99
Type	Voltage Detector
Subcategory	Power Management Circuits
Max Power Dissipation	210mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	FLAT
Number of Functions	1
Supply Voltage	3.8V
Base Part Number	BD49
Output	Push-Pull, Totem Pole
Pin Count	5
Power Supplies	4V
Number of Channels	1
Max Supply Voltage	10V
Min Supply Voltage	1.2V
Operating Supply Current	900nA
Max Supply Current	1.68μA
Adjustable Threshold	NO
Accuracy	1 %
Watchdog Timer	No
Reset	Active Low
Voltage - Threshold	4V
Number of Voltages Monitored	1
Min Reset Threshold Voltage	3.94V
Max Reset Threshold Voltage	4.06V
Threshold Voltage	+4V
Height Seated (Max)	0.6mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

BD4940FVE-TR Product Details

BD4940FVE-TR Overview

It is mounted through 5 terminals on the power management. There is a Tape & Reel (TR)-packaging method applied to IC management. Please find attached 1 functions for your reference in this IC power. There are 1 channels on this power managment ic that can be found in a series. In this IC management you will find SOT-665 functions for you to refer to. This IC power shares lots of benefits with other Voltage Detector products. A supply voltage of 3.8V is used to conduct the PMIC chip. IC management is possible to find a succession of 1 voltages that have been checked. Surface Mount is the one that mounts power management. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, IC powers are 5 pins on the board. There are 5 pins on the power managment ic. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.2V. The maximum supply voltage (Vsup) in this PMIC should not exceed 10V volts. Power management recommends the Surface Mount mounting type. You should set the supervisor's temperature during -40°C~105°C TA . As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. The supply current of the power management is 900nA. For similar manage ics search of the manufacturer, you can always refer to BD49, the base PMIC number. There is a requirement for 4V power to power this power management. At most, voltage supervisor can operate at a supply temperature of 1.68μA. Located in the well-known BD49xxx series product line, this IC management is a kind of this series.