TL712CP Overview
For convenience, it is packaged in 8-DIP (0.300, 7.62mm) .There is a Complementary, Push-Pull, Tri-State, TTL output type for this comparator.Electronic comparator is shipped by Tube .The comparator has a total of 8 terminals.The electrical component here belongs to the Comparator family.With a 5V voltage supply, the comparator can perform multiple demanding tasks.The type of the chip can be classified as Differential .Electronic comparator consists of 1 elements in total.Electronic comparator has 8 pins.The recommended mounting method is Through Hole .Electronic comparator is recommended that you set the operating temperature to 0°C~70°C in order to prevent malfunctions.The comparator has a pin count of 8 .You can find more pin-to-pin solutions by searching TL712 .As a result, this comparator displays a quiescent current of 20mA .This component has a Through Hole mount for mounting to PCBs or other boards.Normally, the nominal supply current should be 20mA when using the device.A supply current exceeding 20mA may result in the comparator malfunctioning.There is sufficient power to run the device from 5V power supplies.Comparator electronics is necessary to have an operating supply voltage of 5V for normal operation.
TL712CP Features
Complementary, Push-Pull, Tri-State, TTL output capability
Differential IC
Employing 1 elements
Operates under 0°C~70°C
Quiescent Current: 20mA
TL712CP Applications
There are a lot of Texas Instruments
TL712CP linear comparators applications.
- Lithium ion battery monitoring
- Battery management and protection
- Current and voltage sensing
- Analog front end
- Power management
- Point of load regulators
- DC/DC and AC/DC power supplies
- System control and monitoring
- Wearable Devices
- Mobile Phones and Tablets
