TS334IPT Overview
The product is packaged in 14-TSSOP (0.173, 4.40mm Width) in order to facilitate transportation.Output type of this comparator is Open Drain .The part is shipped by Tape & Reel (TR) .The comparator has 14 terminals.The electrical component in this case belongs to the Comparator family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 1.8V .This is a typical comparator of type General Purpose .Currently, it consists of only 4 elements.The device includes 14 pins.In general, mounting type Surface Mount is recommended.Ideally, the operating temperature should be set at -40°C~125°C in order to prevent malfunction.14 pins are available on the comparator.In order to find a solution that meets your specific needs, search TS334 for more pin-to-pin solutions.A quiescent current of 26μA is observed in this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.A power supply of 1.8/5V is sufficient for the operation of the device.You are allowed to input a maximum current of 40nA into the device.The voltage gain of the part is indicated by 100dB in the voltage formula.Providing a minimum current of 0.038mA is possible for this part.For normal operation, the operating supply voltage must be 3V .
TS334IPT Features
Open Drain output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 26μA
Voltage Gain: 100dB
TS334IPT Applications
There are a lot of STMicroelectronics
TS334IPT linear comparators applications.
- Self-diagnostics
- Lithium ion battery monitoring
- Battery management and protection
- Current and voltage sensing
- Analog front end
- Power management
- Point of load regulators
- DC/DC and AC/DC power supplies
- System control and monitoring
- Wearable Devices
