Name: TL5001AIP
Brand: Texas Instruments
SKU: TL5001AIP
Price: 3.11000 USD
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	8-DIP (0.300, 7.62mm)
Number of Pins	8
Weight	440.409842mg
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Termination	Through Hole
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Max Power Dissipation	1W
Terminal Position	DUAL
Terminal Pitch	2.54mm
Frequency	500kHz
Base Part Number	TL5001
Function	Step-Up, Step-Down, Step-Up/Step-Down
Number of Outputs	1
Output Voltage	50V
Output Type	Transistor Driver
Max Output Current	20mA
Input Voltage-Nom	6V
Analog IC - Other Type	SWITCHING CONTROLLER
Operating Supply Current	1.4mA
Output Configuration	Positive
Power Dissipation	1W
Output Current	20mA
Voltage - Supply (Vcc/Vdd)	3.6V~40V
Quiescent Current	1.1mA
Control Features	Dead Time Control, Frequency Control
Max Output Voltage	50V
Topology	Buck, Boost, Flyback
Min Input Voltage	3.6V
Control Mode	VOLTAGE-MODE
Frequency - Switching	20kHz~500kHz
Max Input Voltage	40V
Control Technique	PULSE WIDTH MODULATION
Synchronous Rectifier	No
Nominal Input Voltage	6V
Switcher Configuration	SINGLE
Max Duty Cycle	100 %
Isolation	Non-Isolated
Height	5.08mm
Length	9.81mm
Width	6.35mm
Thickness	3.9mm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TL5001AIP Product Details

TL5001AIP Overview

This switching controller fits most application requirements since it is packaged in a 8-DIP (0.300, 7.62mm) package. 1 outputs can be generated with the dc motor controller. PMIC is packaged in a solid enclosure of Tube. Transistor Driver dc switching's outputs (s) are supported. 3.6V~40V is the operating voltage and supply voltage of the dc control. Suitable for a -40°C~85°C TA dc switcher. There is a switch at 20kHz~500kHz that can be used with this controller. dc dc regulator is made easier with Through Hole. Dead Time Control, Frequency Control is used for efficient switching control in the dcdc regulator. An analog IC SWITCHING CONTROLLER is connected to the switch converters. The switching converters's terminal (s) are designed at DUAL . A variety of terminations with 8 of dc switching. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. DC switcher's input voltageis set to 6V. You can find other relevant dc to dc converter ics by searching "TL5001". There are only 8 pins on switching converter. DC regulator outputs 50V voltage according to the test statistics. normally, the dc dc regulator's output current is 20mA, which you should keep in mind when starting a project. voltage regulator dc to dcs with a 100 % duty cycle are designed to be reliable when powered on and powered off. Having a Through Hole makes DC switcher ideal for most prototype and application designs. Switching controllers operate at 500kHz frequencies. When the dc switching is dormant, it uses 1.1mA. It is possible to set the input voltage to 6V for nominal working status. Users must limit the voltage accordingly because the dc switcher's maximum input voltage is 40V. The supply voltage must be 3.6V. Output current will not exceed 20mA. As per its datasheet, the switching converter has a maximum output of 50V volts. A supply current of 1.4mA is used to power it.

TL5001AIP Features

Transistor Driver Outputs
Switching Frequency: 20kHz~500kHz
Dead Time Control, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 500kHz