NCV494BDR2G Overview
It comes in the 16-SOIC (0.154, 3.90mm Width) package, which makes switching controller suitable for most applications. The dc motor controller is adquate to generate for 1 outputs. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. With Transistor Driver dc switching's output (s), it is able to handle it. 7V~40V is the operating voltage and supply voltage of the dc control. Suitable for work in a -40°C~125°C TJ dc switcher. Surface Mount makes it suitable for general dc dc regulator. Featured in the dcdc regulator is Dead Time Control, Frequency Control which allows efficient switching control. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. The switching converters's terminals (s) are designed at DUAL. The 16 terminations can be used for a wide range of dc switching. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 15V. Other relevant dc to dc converter ics can be found by searching "NCV494B". Switching converter has a total of 16 pins. The type is a particular Switching Regulator or Controllers of switching converter. It is recommended to use 7V as the minimum input voltage of dc dc voltage regulator. A maximum voltage of 40V is accepted by the dc to dc regulator as an input voltage. It's important to remember that the dc dc regulator's normaloutput current is 500mA, so you should note it down when starting a new project. voltage regulator dc to dcs with a 48 % duty cycle are designed to be reliable when powered on and powered off. This Surface Mount makes DC switcher suitable for most prototypes and applications. Switching controllers work at 40kHz Hz. In order to run the voltage regulator dc to dc safely and reliably, users are advised to apply 15V. SWITCHMODE? is a series of dc to dc voltage regulator. If the current exceeds 15mA, the component may not operate correctly and may even be damaged.
NCV494BDR2G Features
Transistor Driver Outputs
Dead Time Control, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 48 %
Frequency: 40kHz
NCV494BDR2G Applications
There are a lot of ON Semiconductor NCV494BDR2G DC to DC converter applications.
- Computer rooms
- Smoke prevention equipment
- Plate bending machines
- Imported equipment
- Printing
- Various precision measuring detectors
- Sensitive electronic devices
- Arc suppression circuits
- Communication system
- Balance equipment
