TL062CPSRG4 Overview
It is packaged in an SOP-case that protects the operational amplifiers from damage. An op amp of this type is a OPERATIONAL AMPLIFIER-type. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 3mV for input offset voltage. A supply current of 200μA can be used to operate this linear amplifier. There should be no change in the voltage gain at 75.56dB. There are a total of 2 channels available on the op amps. This instrumentation amplifier cannot operate below -40°C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 85°C. The operating supply voltage of the buffer op amp is rated at 18V. An buffer amplifier is packed in a TAPE AND REEL-shape according to the design. In order to conduct this part, you will need to provide dual supply voltages of 18V volts.
TL062CPSRG4 Features
8 Pins
supply voltage of 15V
75.56dB voltage gain
TL062CPSRG4 Applications
There are a lot of Texas Instruments
TL062CPSRG4 Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
