TL054CDBRG4 Overview
In the package, you will find a 14-SSOP (0.209, 5.30mm Width)-case to contain the op amp ic. A J-FET-type buffer amplifier is shown here. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 14. The pins on this board total to 14 in total. Please take in mind that op amp should be run at 5V. Instrumentation amplifier is a part of Operational Amplifier. 14 pins are available on the instrumentation amplifier. As far as the input offset voltage is concerned, linear amplifier rates at 560μV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In relation to the operating temperature of this buffer op amp, it works well at an average of 0°C~70°C . The buffer amplifier is capable of operating from a supply current of 8.4mA . It is recommended to keep the voltage gain at 97.15dB at all times. A linear amplifier like this has 4 circuits on it. The operating supply voltage of instrumentation amplifier is rated 15V voltage. For packing the buffer amplifier, the TAPE AND REEL-axis is adopted.
TL054CDBRG4 Features
14 Pins
supply voltage of 5V
97.15dB voltage gain
TL054CDBRG4 Applications
There are a lot of Texas Instruments TL054CDBRG4 Instrumentational OP Amps applications.
- Power control
- Exponential operation circuits
- Switching amplifier
- Television broadcasting equipment
- Television
- High speed sample
- Active probe
- Instrumentation
- Commercial audio systems
- High input resistance broadband
