INA337AIDGKTG4 Overview
Op amp is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. Instrumentation-type instrumentation amplifiers are used in this application. The op amp is delivered to you in a Tape & Reel (TR) case. During the past two weeks, there have been close to 8 terminations. It consists of a total of 8 pins in total. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. 8 pins are located on the operational amplifiers. With regard to input offset voltage, instrumentation amplifier is rated at 100μV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . The buffer amplifier is capable of operating from a supply current of 2.4mA . The voltage gain should stay at 80dB. The buffer amp consists of 1 circuits in total. There is a rating of 3 for the operating supply voltage of the buffer op amp. The linear amplifier is packaged by using a TR axis. Currently, linear amplifier is operating with a quiescent current of 2.4mA. Instrumentation amplifier resistance should remain within the range of 10GOhm.
INA337AIDGKTG4 Features
8 Pins
supply voltage of 5V
80dB voltage gain
Resistance of 10GOhm
INA337AIDGKTG4 Applications
There are a lot of Texas Instruments INA337AIDGKTG4 Instrumentational OP Amps applications.
- Medical imaging
- Non-polarized electrodes
- Multimedia playback equipment
- Test equipment
- Large motor controllers
- Cinema or auditorium audio system
- Vehicle electronics
- earphone
- Signal amplification
- High/low-pass filter circuit
