TL034ACDRE4 Overview
It is packaged in an SOIC-case that protects the operational amplifiers from damage. An op amp of this type is a OPERATIONAL AMPLIFIER-type. As far as the packaging is concerned, buffer op amp is delivered in a Tape and Reel case. It is estimated that there will be at least 14 terminations this year. A total of 14 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. In total, the buffer amplifier consists of 14 pins. Op amp ic rates 580μV for input offset voltage. A supply current of 870μA can be used to operate this linear amplifier. There should be no change in the voltage gain at 81.58dB. This instrumentation amplifier cannot operate below -40°C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 85°C. There are 4 elements in this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 15V. In order to conduct this part, you will need to provide dual supply voltages of 15V volts.
TL034ACDRE4 Features
14 Pins
supply voltage of 5V
81.58dB voltage gain
TL034ACDRE4 Applications
There are a lot of Texas Instruments
TL034ACDRE4 Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
