TLC27L2CPSRG4 Overview
In the package, you will find a SOP-case to contain the op amp ic. The instrumentation amplifier in this picture is of the OPERATIONAL AMPLIFIER-type. A Tape & Reel case is used for delivering the op amp. During the past two weeks, there have been close to 8 terminations. A total of 8 pins are located on this board. This linear amplifier should be powered by an 5V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. The op amp ic has an array of 8 pins on it. Op amp rates 1.1mV as input offset voltage. Using an 29μA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 116.9dB for the time being. On the buffer amps, there are 2 channels that can be used. To operate this buffer amplifier, the temperature must not be lower than 0°C. A temperature greater than 70°C should not be used for the operation of buffer amplifier. The linear amplifier is packaged by using a TAPE AND REEL axis. This electric component can work from a voltage of under 16V as far as supply voltage is concerned. A voltage of 3V or higher is recommended for the linear amplifier's supply voltage.
TLC27L2CPSRG4 Features
8 Pins
supply voltage of 5V
116.9dB voltage gain
TLC27L2CPSRG4 Applications
There are a lot of Texas Instruments
TLC27L2CPSRG4 Instrumentational OP Amps applications.
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video computer boards
