THS4082IDGNRG4 Overview
It is packaged in an HTSSOP EP-case that protects the operational amplifiers from damage. As far as the packaging is concerned, buffer op amp is delivered in a Tape and Reel case. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are attached to buffer op amp. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 7mV for input offset voltage. A supply current of 3.4mA can be used to operate this linear amplifier. There should be no change in the voltage gain at 84.08dB. There are a total of 1 channels available on the op amps. This instrumentation amplifier cannot operate below -40°C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 85°C. There are 2 elements in this buffer amplifier. It is important to keep in mind that the power supply voltage of this electric component is below 30V, which is suitable. Keeping the linear amplifier's supply voltage above 10V is recommended. In order to conduct this part, you will need to provide dual supply voltages of 16.5V volts. The VIDEO AMPLIFIER value can be used to sort the electronic part by its consumer IC type. This buffer op amp has the following extra benefit: IT CAN ALSO OPERATE WITH 10V TO 30V SINGLE SUPPLY.
THS4082IDGNRG4 Features
8 Pins
84.08dB voltage gain
THS4082IDGNRG4 Applications
There are a lot of Texas Instruments
THS4082IDGNRG4 Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
