THS4052CDGNRG4 Overview
The linear amplifier is packaged in a HTSSOP EP case which makes it easy for the consumer to handle. The instrumentation amplifier in this picture is of the OPERATIONAL AMPLIFIER-type. A Tape and Reel case is used for delivering the op amp. It is estimated that there will be at least 8 terminations this year. Buffer amplifier has a total of 8 pins. Please take in mind that this instrumentation amplifier should be run at 15V. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. 8 pins are available on the instrumentation amplifier. There is an input offset voltage of 10mV for this buffer op amp. Using a supply current of 8.5mA , this buffer op amp will be able to operate. Maintain 75.56dB as the voltage gain. It should not lower than 0°C to operate buffer amplifier. At temperatures greater than 70°C, op amp should not be used. There are 2 elements in total in this linear amplifier. With regard to the supply voltage, this electrical component is capable of working from under 32V. To keep the buffer amps' supply voltage higher than 9V. This electronic part should be conducted with a dual supply voltage of 16.5V volts for this part.
THS4052CDGNRG4 Features
8 Pins
supply voltage of 15V
75.56dB voltage gain
THS4052CDGNRG4 Applications
There are a lot of Texas Instruments THS4052CDGNRG4 Instrumentational OP Amps applications.
- Non-polarized electrodes
- Portable electronic products powered by batteries
- Laptop
- Inverse/same-phase proportional circuit
- High-frequency data acquisition systems
- RF cable systems
- E-book readers
- Proportional counter tubes
- Exponential operation circuits
- Fast A/D and D/A converters
