LTC1992HMS8 Overview
Packaged in a MSOP case, the buffer op amp is ready to use. A total of 8 pins are present on the instrumentation amplifier. There is an input offset voltage of 250μV for this buffer op amp. As long as the supply current of the chip does not exceed 700μA, this op amp ic can operate. 80dB should remain the voltage gain. During the manufacturing process, this buffer amplifier is divided into 1 circuits. As far as the device is concerned, buffer amplifier has 1 channels. For the buffer op amp to operate properly, it must be above the temperature of -40°C degrees Celsius. No temperature greater than 125°C should be used. The linear amplifier consists of 1 different elements in total. In terms of the supply voltage, this electrical part is capable of operating at low voltage levels of under 12V. A high supply voltage of more than 2.4V is recommended for the instrumentation amplifier's supply voltage. As a rule of thumb, you should conduct this electronic part under a dual voltage supply of 5.5V volts. Instrumentation amplifier resistance should stay within the range of 500MOhm.
LTC1992HMS8 Features
80dB voltage gain
Resistance of 500MOhm
LTC1992HMS8 Applications
There are a lot of Analog Devices, Inc.
LTC1992HMS8 Instrumentational OP Amps applications.
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
