THS3061DRG4 Overview
Packaged in a D case, the buffer op amp is ready to use. The op amp is delivered to you in a Tape and Reel case. There is a growing number of terminations approaching the number of 8. The pins on this board total to 8 in total. A total of 8 pins are present on the instrumentation amplifier. There is an input offset voltage of 3.5mV for this buffer op amp. As long as the supply current of the chip does not exceed 8.3mA, this op amp ic can operate. As far as the device is concerned, buffer amplifier has 1 channels. For the buffer op amp to operate properly, it must be above the temperature of -40°C degrees Celsius. No temperature greater than 85°C should be used. The linear amplifier consists of 1 different elements in total. In terms of the supply voltage, this electrical part is capable of operating at low voltage levels of under 30V. A high supply voltage of more than 10V is recommended for the instrumentation amplifier's supply voltage. As a rule of thumb, you should conduct this electronic part under a dual voltage supply of 15V volts.
THS3061DRG4 Features
8 Pins
THS3061DRG4 Applications
There are a lot of Texas Instruments
THS3061DRG4 Instrumentational OP Amps applications.
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
