MC100EP11DTR2 Overview
It is packaged in an TSSOP-case that protects the operational amplifiers from damage. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 3.3V battery and that the battery should be inserted in the amplifier. A type of Clock Drivers op amp ic can be identified by the fact that this is a type of Clock Drivers device. This instrumentation amplifier cannot operate below -40°C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 85°C. It is important to keep in mind that the power supply voltage of this electric component is below 5.5V, which is suitable. Keeping the linear amplifier's supply voltage above 3V is recommended. This buffer op amp has the following extra benefit: NECL MODE: VCC=0 WITH VEE = -3.0V TO -5.5V.
MC100EP11DTR2 Features
8 Pins
supply voltage of 3.3V
MC100EP11DTR2 Applications
There are a lot of ON Semiconductor
MC100EP11DTR2 Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
