SNJ5497J Overview
In the CDIPpackage, it is supplied. In order to configure it, it uses 16terminations. As a result of the supply voltage of 0, 5Vcan operate in a fully flexible manner. The total number of component pins is 16. To connect the circuit's other components, there are 16pins. Using [0], it can be mounted. In this device, there is information of 6bits. It is important to note that in regards to this electronic device, BINARY RATE MULTIPLIER; ENABLE INPUT AND OUTPUTS; COMPLEMENTARY OUTPUTSis an extremely significant feature. The device is manufactured at a temperature grade of MILITARY. In order to pack the product, TUBEis employed. From the voltage source, there is 5Vvoltage. Electrical characteristics are stable at temperature 125°Cfor extended periods of time. It operates within a specified temperature range, with the lower limit typically set at -55°C degrees Celsius. In the case of the supply voltage (Vsup), it can be as low as 4.75V. There is 5.25V maximum supply voltage (Vsup) allowed. This device uses a logic IC type of [0].
SNJ5497J Features
Embedded in the CDIP package
BINARY RATE MULTIPLIER; ENABLE INPUT AND OUTPUTS; COMPLEMENTARY OUTPUTS
BINARY COUNTER as logic IC type
SNJ5497J Applications
There are a lot of Texas Instruments
SNJ5497J Counters & Dividers applications.
- Digital multiplexing and demultiplexing
- Signal gating
- Frequency dividing circuits
- Time delay circuits
- Communications Digital Frequency Synthesizers;
- VHF, UHF, FM, AM, etc.
- Fixed or Programmable Frequency Division
- Time Out Timer for Consumer-Application Industrial Controls
- Timing applications
- Clocks
