SN74ALS867ADWR Overview
The device is packaged in the 24-SOIC (0.295, 7.50mm Width)type. This configuration uses 24terminations. By supplying 5Vwith a voltage of 5V , the device can be operated in a completely flexible manner. An interconnection of 1elements is provided by wires. All component pins are equal to 24. There is a package in the form of Tape & Reel (TR). As part of the circuit, there are 24pins that connect other components. The Surface Mountway is used to mount it. In this case, it belongs to the family of [0]. Due to the fact that it is a member of the 74ALSseries, it has a wide range of applications. Logic type Binary Counter is adopted. Ideally, the operating temperature should be set to 0°C~70°C. This device is mounted in the Surface Mountposition. As long as the supply voltage is set to [0], the device can operate with a greater degree of reliability. As far as the device is concerned, there are 8bits of information. Based on the Pbfree code, the result may be yes. It is important to note that TCO OUTPUTare really important features of this electronic device. Further related parts may be found under the base part number 74ALS867. For its packaging, TAPE AND REELis employed. As low as 4.5V Vsup is the minimum supply voltage. The frequency of the system is 35MHz. It is possible to provide a voltage up to 5.5V (Vsup). There are 8 input lines that allow binary data to be input in the form of an on/off signal.
SN74ALS867ADWR Features
Embedded in the 24-SOIC (0.295, 7.50mm Width) package
TCO OUTPUT
Frequency of 35MHz
SN74ALS867ADWR Applications
There are a lot of Texas Instruments
SN74ALS867ADWR Counters & Dividers applications.
- Analog multiplexing and demultiplexing
- Digital multiplexing and demultiplexing
- Signal gating
- Frequency dividing circuits
- Time delay circuits
- Communications Digital Frequency Synthesizers;
- VHF, UHF, FM, AM, etc.
- Fixed or Programmable Frequency Division
- Time Out Timer for Consumer-Application Industrial Controls
- Timing applications
