SN74LVC74APWR Overview
It is packaged in the way of 14-TSSOP (0.173, 4.40mm Width). A package named Cut Tape (CT)includes it. T flip flop uses Differentialas the output. The trigger configured with it uses Positive Edge. There is an electric part mounted in the way of Surface Mount. A supply voltage of 1.65V~3.6V is required for operation. It is operating at a temperature of -40°C~125°C TA. A flip flop of this type is classified as a D-Type. It belongs to the 74LVCseries of FPGAs. A frequency of 150MHzshould not be exceeded by its output. The number of terminations is 14. The 74LVC74family includes it. Power is provided by a 1.8V supply. A 5pFfarad input capacitance is provided by this T flip flop. Devices in the LVC/LCX/Zfamily are electronic devices. There is an electronic part that is mounted in the way of Surface Mount. This board has 14 pins. A Positive Edgeclock edge trigger is used in this device. This RS flip flops is a part number FF/Latches. It reaches 3.6Vwhen the supply voltage is maximal (Vsup). Using 2 circuits, it is highly flexible. Due to its reliability, this T flip flop is well suited for TR. It operates from 3.3V power supplies. In order to achieve high efficiency, the supply voltage should be maintained at 1.8V. The 50mA output current allows it to be designed with the greatest amount of flexibility. It operates with 1 output lines. It consumes a total of 10μA quiescent current at any given time.
SN74LVC74APWR Features
Cut Tape (CT) package
74LVC series
14 pins
3.3V power supplies
SN74LVC74APWR Applications
There are a lot of Texas Instruments SN74LVC74APWR Flip Flops applications.
- ESCC
- Count Modes
- ATE
- QML qualified product
- Functionally equivalent to the MC10/100EL29
- Divide a clock signal by 2 or 4
- Frequency division
- Computers
- Test & Measurement
- Set-reset capability
