SN74LVC574APW Overview
20-TSSOP (0.173, 4.40mm Width)is the packaging method. Package Tubeembeds it. Tri-State, Non-Invertedis the output configured for it. It is configured with a trigger that uses Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. A supply voltage of 1.65V~3.6V is required for operation. In the operating environment, the temperature is -40°C~125°C TA. D-Typeis the type of this D latch. The FPGA belongs to the 74LVC series. It should not exceed 150MHzin terms of its output frequency. A total of 1elements are present in it. There is 10μA quiescent consumption. There are 20 terminations,This D latch belongs to the family of 74LVC574. An input voltage of 1.8Vpowers the D latch. This T flip flop has a capacitance of 4pF farads at the input. Electronic devices of this type belong to the LVC/LCX/Zfamily. Surface Mount mounts this electronic component. It is designed with 20 pins. This device has Positive Edgeas its clock edge trigger type. This RS flip flops is a part number Bus Driver/Transceiver. The design is based on 8bits. Its superior flexibility is attributed to its use of 8 circuits. A D flip flop with 2embedded ports is available. The output current of 24mA makes it feature maximum design flexibility. It has 3lines. Quiescent current is consumed by the D latch in the amount of 1.5μA.
SN74LVC574APW Features
Tube package
74LVC series
20 pins
8 Bits
SN74LVC574APW Applications
There are a lot of Texas Instruments SN74LVC574APW Flip Flops applications.
- Cold spare funcion
- Shift Registers
- Divide a clock signal by 2 or 4
- High Performance Logic for test systems
- Shift registers
- Frequency Dividers
- Asynchronous counter
- Data Synchronizers
- Set-reset capability
- Guaranteed simultaneous switching noise level
