NLV74HCT574ADTRG Overview
In the form of 20-TSSOP (0.173, 4.40mm Width), it has been packaged. You can find it in the Tape & Reel (TR)package. As configured, the output uses Tri-State, Non-Inverted. Positive Edgeis the trigger it is configured with. There is an electronic component mounted in the way of Surface Mount. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. Currently, the operating temperature is -55°C~125°C TA. There is D-Type type of electronic flip flop associated with this device. The FPGA belongs to the 74HCT series. It should not exceed 30MHzin its output frequency. The list contains 1 elements. There is a consumption of 4μAof quiescent energy. Terminations are 20. JK flip flop belongs to 74HCT574 family. It is powered by a voltage of 5V . The input capacitance of this JK flip flopis 10pF farads. It is a member of the HCTfamily of D flip flop. There is an electronic part that is mounted in the way of Surface Mount. In this device, the clock edge trigger type is Positive Edge. In this case, the maximum supply voltage (Vsup) reaches 5.5V. For normal operation, the supply voltage (Vsup) should be kept above 4.5V. There are 2 ports embedded in the flip flops.
NLV74HCT574ADTRG Features
Tape & Reel (TR) package
74HCT series
NLV74HCT574ADTRG Applications
There are a lot of ON Semiconductor NLV74HCT574ADTRG Flip Flops applications.
- Data transfer
- Buffered Clock
- CMOS Process
- Buffer registers
- Load Control
- Consumer
- Circuit Design
- ESD protection
- Instrumentation
- Modulo – n – counter
