SN74LVC1G79QDCKTQ1 Overview
It is embeded in 5-TSSOP, SC-70-5, SOT-353 case. There is an embedded version in the package Tape & Reel (TR). There is a Non-Invertedoutput configured with it. It is configured with the trigger Positive Edge. Surface Mountis occupied by this electronic component. A supply voltage of 1.65V~5.5V is required for operation. Temperature is set to -40°C~125°C TA. Logic flip flops of this type are classified as D-Type. FPGAs belonging to the Automotive, AEC-Q100, 74LVCseries contain this type of chip. A frequency of 160MHzshould be the maximum output frequency. The list contains 1 elements. As a result, it consumes 10μA quiescent current. There are 5 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. JK flip flop belongs to 74LVC1G79 family. A voltage of 3.3V is used to power it. Its input capacitance is 4pFfarads. LVC/LCX/Zis the family of this D flip flop. As you can see from the design, it has pins with 5. Flip flops designed with 1bits are used in this part. In view of its reliability, this D flip flop is a good fit for TR.
SN74LVC1G79QDCKTQ1 Features
Tape & Reel (TR) package
Automotive, AEC-Q100, 74LVC series
5 pins
1 Bits
SN74LVC1G79QDCKTQ1 Applications
There are a lot of Texas Instruments SN74LVC1G79QDCKTQ1 Flip Flops applications.
- Latch-up performance
- Balanced 24 mA output drivers
- Frequency Divider circuits
- Computers
- Supports Live Insertion
- Data Synchronizers
- Reduced system switching noise
- 2 – Bit synchronous counter
- Test & Measurement
- Pattern generators
