MC74HC273ADTR2G Overview
It is embeded in 20-TSSOP (0.173, 4.40mm Width) case. D flip flop is embedded in the Tape & Reel (TR) package. As configured, the output uses Non-Inverted. There is a trigger configured with Positive Edge. Surface Mountis occupied by this electronic component. It operates with a supply voltage of 2V~6V. A temperature of -55°C~125°C TAis considered to be the operating temperature. It belongs to the type D-Typeof flip flops. In this case, it is a type of FPGA belonging to the 74HC series. In order for it to function properly, its output frequency should not exceed 35MHz. There are 1 elements in it. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. If you search by 74HC273, you will find similar parts. The power supply voltage is 3V. Its input capacitance is 10pF farads. A device of this type belongs to the family of HC/UH. Electronic part Surface Mountis mounted in the way. This board has 20 pins. The clock edge trigger type for this device is Positive Edge. It is included in FF/Latches. An electronic part with 8bits has been designed. As soon as Vsup reaches 6V, the maximum supply voltage is reached. The supply voltage (Vsup) should be maintained above 2V for normal operation. As a result of its reliable performance, this T flip flop is suitable for TAPE AND REEL. This input has 8lines. Quiescent current is consumed by the D latch in the amount of 4μA. It is reported that there are 6 channels.
MC74HC273ADTR2G Features
Tape & Reel (TR) package
74HC series
20 pins
8 Bits
MC74HC273ADTR2G Applications
There are a lot of ON Semiconductor MC74HC273ADTR2G Flip Flops applications.
- Single Down Count-Control Line
- Test & Measurement
- Supports Live Insertion
- Counters
- Patented noise
- Cold spare funcion
- Memory
- Divide a clock signal by 2 or 4
- Control circuits
- Computing
