SN74LVC1G80DBVR Overview
The flip flop is packaged in a case of SC-74A, SOT-753. A package named Cut Tape (CT)includes it. There is a Invertedoutput configured with it. It is configured with a trigger that uses Positive Edge. Surface Mountis positioned in the way of this electronic part. A voltage of 1.65V~5.5Vis required for its operation. The operating temperature is -40°C~125°C TA. This electronic flip flop is of type D-Type. JK flip flop is a part of the 74LVCseries of FPGAs. A frequency of 160MHzshould not be exceeded by its output. It consumes 10μA of quiescent There have been 5 terminations. The 74LVC1G80 family contains this object. The power source is powered by 1.8V. JK flip flop input capacitance is 3.5pF farads. The electronic device belongs to the LVC/LCX/Zfamily. It is mounted by the way of Surface Mount. It is designed with 5 pins. There is a clock edge trigger type of Positive Edgeon this device. There is a base part number FF/Latchesfor the RS flip flops. The design is based on 1bits. 1 circuits are used to achieve its superior flexibility. As a result of its reliability, this D flip flop is ideally suited for TR. The system runs on a power supply of 3.3V watts. The 32mA output current allows it to be designed with the greatest amount of flexibility.
SN74LVC1G80DBVR Features
Cut Tape (CT) package
74LVC series
5 pins
1 Bits
3.3V power supplies
SN74LVC1G80DBVR Applications
There are a lot of Texas Instruments SN74LVC1G80DBVR Flip Flops applications.
- ESCC
- Parallel data storage
- Storage registers
- Buffered Clock
- Balanced Propagation Delays
- 2 – Bit synchronous counter
- Frequency Divider circuits
- Reduced system switching noise
- Asynchronous counter
- Functionally equivalent to the MC10/100EL29
