SN74LVC1G79DCKR Overview
The item is packaged in 5-TSSOP, SC-70-5, SOT-353cases. A package named Cut Tape (CT)includes it. There is a Non-Invertedoutput configured with it. The trigger configured with it uses Positive Edge. There is an electric part mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 1.65V~5.5V volts. A temperature of -40°C~125°C TAis considered to be the operating temperature. There is D-Type type of electronic flip flop associated with this device. It is a type of FPGA belonging to the 74LVC series. You should not exceed 160MHzin the output frequency of the device. Terminations are 5. It is a member of the 74LVC1G79 family. It is powered from a supply voltage of 1.8V. A JK flip flop with a 4pFfarad input capacitance is used here. Devices in the LVC/LCX/Zfamily are electronic devices. In this case, the electronic component is mounted in the way of Surface Mount. A total of 5pins are provided on this board. The clock edge trigger type for this device is Positive Edge. This device is part of the FF/Latchesbase part number family. It is designed with a number of bits of 1. As a result of its reliability, this D flip flop is ideally suited for TR. The power supply is 3.3V. The 32mA output current allows it to be designed with the greatest amount of flexibility. It is designed with 1 output lines. In terms of quiescent current, it consumes 10μA . 1 channels are available.
SN74LVC1G79DCKR Features
Cut Tape (CT) package
74LVC series
5 pins
1 Bits
3.3V power supplies
SN74LVC1G79DCKR Applications
There are a lot of Texas Instruments SN74LVC1G79DCKR Flip Flops applications.
- Dynamic threshold performance
- Balanced Propagation Delays
- Shift Registers
- Patented noise
- ESD performance
- Common Clocks
- Memory
- Buffer registers
- Test & Measurement
- Latch-up performance
