SN74ALVCH16821DGGR Overview
The item is packaged in 56-TFSOP (0.240, 6.10mm Width)cases. You can find it in the Cut Tape (CT)package. It is configured with Tri-State, Non-Invertedas an output. This trigger is configured to use Positive Edge. The electronic part is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 1.65V~3.6V volts. A temperature of -40°C~85°C TAis used in the operation. It is an electronic flip flop with the type D-Type. The 74ALVCHseries comprises this type of FPGA. Its output frequency should not exceed 150MHz. The element count is 2 . As a result, it consumes 40μA of quiescent current without being affected by external factors. In 56terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. The 74ALVCH16821 family contains this object. It is powered by a voltage of 1.8V . The input capacitance of this T flip flop is 3.5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. This D flip flop belongs to the family of ALVC/VCX/A. There is an electronic part mounted in the way of Surface Mount. There are 56pins on it. Its clock edge trigger type is Positive Edge. It is included in FF/Latches. There are 20bits in this flip flop. The supply voltage (Vsup) should be maintained above 1.65V for normal operation. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TR. This D flip flop is equipped with 0 ports. Featuring the maximum design flexibility, it has an output current of 24mA . In order to operate, the chip has 3 output lines.
SN74ALVCH16821DGGR Features
Cut Tape (CT) package
74ALVCH series
56 pins
20 Bits
SN74ALVCH16821DGGR Applications
There are a lot of Texas Instruments SN74ALVCH16821DGGR Flip Flops applications.
- Functionally equivalent to the MC10/100EL29
- Storage Registers
- Set-reset capability
- Registers
- Patented noise
- Balanced 24 mA output drivers
- ATE
- Buffered Clock
- EMI reduction circuitry
- ESD protection
