SN74LVC1G74DCUR Overview
As a result, it is packaged as 8-VFSOP (0.091, 2.30mm Width). D flip flop is included in the Tape & Reel (TR)package. In the configuration, Differentialis used as the output. It is configured with the trigger Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. Powered by a 1.65V~5.5Vvolt supply, it operates as follows. It is operating at a temperature of -40°C~125°C TA. This electronic flip flop is of type D-Type. The FPGA belongs to the 74LVC series. Its output frequency should not exceed 200MHz Hz. It has been determined that there have been 8 terminations. This D latch belongs to the family of 74LVC1G74. Power is provided by a 3.3V supply. There is 5pF input capacitance for this T flip flop. It is a member of the LVC/LCX/Zfamily of D flip flop. Electronic part Surface Mountis mounted in the way. With its 8pins, it is designed to work with most electronic flip flops. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. This device is part of the FF/Latchesbase part number family. Flip flops designed with 1bits are used in this part. Vsup reaches 5.5V, the maximal supply voltage. Despite its superior flexibility, it relies on 1 circuits to achieve it. A reliable performance of this D flip flop makes it well suited for use in TR. It operates from 3.3V power supplies. The output current of 32mA makes it feature maximum design flexibility. As a result, it consumes 10μA of quiescent current without being affected by external factors. Its basic building block contains 2 gates.
SN74LVC1G74DCUR Features
Tape & Reel (TR) package
74LVC series
8 pins
1 Bits
3.3V power supplies
2 gates
SN74LVC1G74DCUR Applications
There are a lot of Texas Instruments SN74LVC1G74DCUR Flip Flops applications.
- Memory
- Clock pulse
- 2 – Bit synchronous counter
- Shift Registers
- ESD performance
- Dynamic threshold performance
- Consumer
- Storage Registers
- Instrumentation
- Balanced 24 mA output drivers
