SN74LVC1G66DBVT Overview
The electrical component comes in SC-74A, SOT-753 packaging, which makes it convenient to ship overseas. High reliability is achieved by using advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. 1:1 is the number of circuits in the multiplexer and demultiplexer. Increasing operating temperature to around -40°C~85°C TA. A total of 5 terminations have been recorded. By its 1 channels, the electronic component provides high-quality output. When the electronic component is given a voltage of 1.8V, it should be turned on and run. There are 5 pins injected into the electronic part body. Multiplexers built on a SPST - NO switching circuit are built. Using the 74LVC1G66 search parameter, you can discover variants of the switch. This digital multiplexer has 10Ohm internal resistance. To find out what the functions of 5 pins are, please refer to their datasheets. normally, users should not supply switches with voltages higher than 5.5V. Single supply type digital switch with a low cost. It is recommended that the electrical component receives a voltage of 1.65V. The analogue multiplexer could operate on 10μA current. Analogue multiplexers require a 1.65V~5.5V voltage to drain from a single voltage supply. Putting voltage greater than 10μA on the multiplexer may cause damage. A SPDT analog IC is integrated into the board. It is possible to transfer data over a 195MHz-bandwidth. It has a Drain to Source resistance of 12Ohm ohms.
SN74LVC1G66DBVT Features
1 Channels
Switch Circuit: SPST - NO
10μA Supply Current
-3db Bandwidth: 300MHz
Bandwidth: 195MHz
Drain-to-Source resistance: 12Ohm
SN74LVC1G66DBVT Applications
There are a lot of Texas Instruments SN74LVC1G66DBVT Analog Switches & Multiplexers ICs applications.
- High-Voltage
- Routers
- Avionics
- Sample-and-hold systems
- Audio signal routing
- Modems
- Industrial
- Precision test equipment
- Isolation
- CSU
