Name: ADG706BRUZ
Brand: Hotenda
SKU: ADG706BRUZ
Price: 8.17000 USD
Availability: InStock

new

ADG706BRUZ

Manufacturer part number:ADG706BRUZ

Manufacturer:Hotenda

Description:32ns, 16ns (Typ) 4.5Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG706 28 Pins 100pA 2.5V 28-TSSOP (0.173, 4.40mm Width)

Case Package:SOT-23

Datasheet:ADG706BRUZ Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	16 Weeks
Lifecycle Status	PRODUCTION (Last Updated: 4 weeks ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	28-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	28
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	28
ECCN Code	EAR99
Resistance	2.5Ohm
Additional Feature	CAN ALSO OPERATE WITH SINGLE 3V OR SINGLE 5V SUPPLIES
Subcategory	Multiplexer or Switches
Max Power Dissipation	5μW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	2.5V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG706
Pin Count	28
Operating Supply Voltage	5V
Power Supplies	3/5/+-3V
Number of Channels	16
Interface	Parallel
Number of Circuits	1
Max Supply Voltage	5.5V
Min Supply Voltage	1.8V
Analog IC - Other Type	SPST
Operating Supply Current	1nA
Nominal Supply Current	1μA
Power Dissipation	5μW
Max Supply Current	1μA
Propagation Delay	40 ns
Turn On Delay Time	32 ns
Voltage - Supply, Single/Dual (±)	1.8V~5.5V ±2.5V
Bandwidth	25MHz
Neg Supply Voltage-Nom (Vsup)	-2.5V
Turn-Off Delay Time	10 ns
On-State Resistance (Max)	4.5Ohm
High Level Output Current	30mA
Dual Supply Voltage	2.5V
Multiplexer/Demultiplexer Circuit	16:1
Off-state Isolation-Nom	80 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	13pF 180pF
On-state Resistance Match-Nom	0.3Ohm
Switch Time (Ton, Toff) (Max)	32ns, 16ns (Typ)
Charge Injection	8pC
Crosstalk	-80dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	50ns
Switch-off Time-Max	26ns
Drain to Source Resistance	2.5Ohm
Signal Current-Max	0.03A
Height	1.05mm
Length	9.7mm
Width	4.4mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG706BRUZ Product Details

ADG706BRUZ Overview

Packed in 28-TSSOP (0.173, 4.40mm Width), the electronic component is convenient for shipping overseas. Advanced packaging method Tube is used to provide high reliability. This analog switch is mounted in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 16:1. Extended operating temperature around -40°C~85°C TA. There are 28 terminations totally. By its 16 channels, the electronic component provides high-quality output. With a 2.5V voltage supply, the electrical component should be turned on and run. 28 pins are injected to the electronic part body. This multiplexer is composed of 1 circuits. If you are looking for variants of the digital switch, trying search with ADG706. This digital multiplexer has 2.5Ohm internal resistance. Please refer to the datasheets for 28 pins functions. This switch device is a typical Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 5.5V. The lowest voltage fed to the electronic component should be 1.8V. 1nA current would be enough for this multiplexer to operate. If put voltage greater than 1μA on the device, damage may be caused to the analogue multiplexer. Integrated with SPST analog IC. The electronic component can function from 5V. This switch operates within the bandwidth of 25MHz. Don’t miss additional features of the electronic component such as: CAN ALSO OPERATE WITH SINGLE 3V OR SINGLE 5V SUPPLIES. This electronic component presents a Drain to Source resistance of 2.5Ohm.

ADG706BRUZ Features

16 Channels
1nA Supply Current
Bandwidth: 25MHz
Additional Features: CAN ALSO OPERATE WITH SINGLE 3V OR SINGLE 5V SUPPLIES
Drain-to-Source resistance: 2.5Ohm