SN74LVC1G175YZPR Overview
6-XFBGA, DSBGAis the way it is packaged. The Tape & Reel (TR)package contains it. It is configured with Non-Invertedas an output. In the configuration of the trigger, Positive Edgeis used. This electronic part is mounted in the way of Surface Mount. A 1.65V~5.5Vsupply voltage is required for it to operate. -40°C~85°C TAis the operating temperature. It is an electronic flip flop with the type D-Type. JK flip flop belongs to the 74LVCseries of FPGAs. In order for it to function properly, its output frequency should not exceed 175MHz. Despite external influences, it consumes 10μAof quiescent current. Terminations are 6. You can search similar parts based on 74LVC1G175. Power is provided by a 1.8V supply. The input capacitance of this T flip flop is 3pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. In this case, the D flip flop belongs to the LVC/LCX/Zfamily. In this case, the electronic component is mounted in the way of Surface Mount. It is designed with 6 pins. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. This device is part of the FF/Latchesbase part number family. 1bits are used in its design. Vsup reaches 5.5V, the maximal supply voltage. 1 circuits are used to achieve its superior flexibility. Due to its reliability, this T flip flop is well suited for TR. In order for the device to operate, it requires 3.3V power supplies. With an output current of 32mA, this device offers maximum design flexibility.
SN74LVC1G175YZPR Features
Tape & Reel (TR) package
74LVC series
6 pins
1 Bits
3.3V power supplies
SN74LVC1G175YZPR Applications
There are a lot of Texas Instruments SN74LVC1G175YZPR Flip Flops applications.
- Shift registers
- Automotive
- ESD performance
- Storage Registers
- Set-reset capability
- Supports Live Insertion
- Single Down Count-Control Line
- CMOS Process
- Safety Clamp
- Test & Measurement
