DM74ALS874BWM Overview
The package is in the form of 24-SOIC (0.295, 7.50mm Width). It is included in the package Tube. Tri-State, Non-Invertedis the output configured for it. This trigger is configured to use Positive Edge. Surface Mountis positioned in the way of this electronic part. A 4.5V~5.5Vsupply voltage is required for it to operate. Currently, the operating temperature is 0°C~70°C TA. This electronic flip flop is of type D-Type. The FPGA belongs to the 74ALS series. It should not exceed 30MHzin its output frequency. In total, there are 2 elements. As a result, it consumes 21mA of quiescent current without being affected by external factors. This D latch belongs to the family of 74ALS874. A part of the electronic system is mounted in the way of Surface Mount. With its 24pins, it is designed to work with most electronic flip flops. A Positive Edgeclock edge trigger is used in this device. An electronic part with 8bits has been designed. For high efficiency, the supply voltage should be kept at 5V. To operate, the chip has a total of 3 output lines.
DM74ALS874BWM Features
Tube package
74ALS series
24 pins
8 Bits
DM74ALS874BWM Applications
There are a lot of ON Semiconductor DM74ALS874BWM Flip Flops applications.
- Functionally equivalent to the MC10/100EL29
- Consumer
- Asynchronous counter
- Communications
- Frequency Dividers
- Convert a momentary switch to a toggle switch
- Cold spare funcion
- Data Synchronizers
- Balanced Propagation Delays
- Guaranteed simultaneous switching noise level
