SN74LVC112APWE4 Overview
The item is packaged in TSSOPcases. In total, it contains 2 elements. A total of 16 terminations have been made. A voltage of 1.8V is used to power it. An electronic device belonging to the family LVC/LCX/Zcan be found here. There is an electronic part mounted in the way of Surface Mount. As you can see from the design, it has pins with 16. There is a clock edge trigger type of Negative Edgeon this device. It is part of the FF/Latchesbase part number family. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TUBE. This input has 3lines. -24mAis set as the high level output current. There is no low level output current set at 24mA. Temperatures below 85°Care ideal for operating. Temperatures above -40°Cshould be used. The minimum voltage required for operation is 1.65V. 3.6Vis the maximum supply voltage supported by it. This can be achieved at a frequency of 150MHz. It uses the logic IC J-K FLIP-FLOP. There are 2 functions associated with the JK flip flop. 16pins are provided on the D latch. It features maximum design flexibility due to the 24mA output current.
SN74LVC112APWE4 Features
16 pins
2 Functions
16 pin count
SN74LVC112APWE4 Applications
There are a lot of Texas Instruments
SN74LVC112APWE4 Flip Flops applications.
- Data transfer
- Latch
- Registers
- Memory
- Frequency division
- Memory
- Event Detectors
- Data Synchronizers
- Asynchronous counter
- Modulo – n – counter
