MC10EP131FAG Overview
The package is in the form of 32-LQFP. The Traypackage contains it. The output it is configured with uses Differential. There is a trigger configured with Positive, Negative. Surface Mountis occupied by this electronic component. A voltage of -3V~-5.5Vis used as the supply voltage. A temperature of -40°C~85°C TAis considered to be the operating temperature. It is an electronic flip flop with the type D-Type. The 10EPseries comprises this type of FPGA. Its output frequency should not exceed 3GHz Hz. In total, it contains 1 elements. This process consumes 120mA quiescents. Terminations are 32. D latch belongs to the 10EP131 family. It is powered by a voltage of 3.3V . An electronic device belonging to the family 10Ecan be found here. Electronic part Surface Mountis mounted in the way. A total of 32pins are provided on this board. Its clock edge trigger type is Positive Edge. This device has the base part number FF/Latches. It is designed with 4bits. Vsup reaches 5.5V, the maximal supply voltage. The supply voltage (Vsup) should be maintained above 3V for normal operation. The superior flexibility is achieved through the use of 4 circuits. An electrical current of -5.2V volts is applied to it. As a result of its output current of 50mA, it is very flexible in terms of design. In addition, NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5Vis a characteristic of it.
MC10EP131FAG Features
Tray package
10EP series
32 pins
4 Bits
-5.2V power supplies
MC10EP131FAG Applications
There are a lot of ON Semiconductor MC10EP131FAG Flip Flops applications.
- 2 – Bit synchronous counter
- Circuit Design
- Power down protection
- Data transfer
- Common Clocks
- Load Control
- Bounce elimination switch
- Bus hold
- Differential Individual
- Data storage
