Name: SN74LV4051ADRG4
Brand: Texas Instruments
SKU: SN74LV4051ADRG4
Availability: InStock

new-10%

SN74LV4051ADRG4

Manufacturer part number:SN74LV4051ADRG4

Manufacturer:Texas Instruments

Description:14ns, 14ns 75Ohm DUAL Analog Switches 74LV4051 16 Pins 100nA 2.3V 16-SOIC (0.154, 3.90mm Width)

Case Package:SOT-23

Datasheet:SN74LV4051ADRG4 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Weight	141.690917mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	75Ohm
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	NOT SPECIFIED
Number of Functions	1
Supply Voltage	2.3V
[email protected] Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	74LV4051
Pin Count	16
Qualification Status	Not Qualified
Power Supplies	3.3V
Number of Channels	8
Number of Circuits	1
Max Supply Voltage	5.5V
Min Supply Voltage	2V
Operating Supply Current	20μA
Nominal Supply Current	20μA
Propagation Delay	7 ns
Turn On Delay Time	28 ns
Logic Function	Demultiplexer, Multiplexer
Number of Inputs	8
Supply Type	Single
Bandwidth	35MHz
Supply Current-Max (Isup)	0.02mA
Turn-Off Delay Time	28 ns
On-State Resistance (Max)	75Ohm
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	45 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	0.5pF 23.4pF
On-state Resistance Match-Nom	2.1Ohm
Switch Time (Ton, Toff) (Max)	14ns, 14ns
Channel-to-Channel Matching (ΔRon)	1.3 Ω
Voltage - Supply, Single (V+)	2V~5.5V
Signal Current-Max	0.05A
Length	9.9mm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

SN74LV4051ADRG4 Product Details

SN74LV4051ADRG4 Overview

Shipping overseas is convenient due to the electrical component's packing in 16-SOIC (0.154, 3.90mm Width). This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have a number of circuits 8:1. Increasing operating temperature to around -40°C~85°C TA. Total terminations are 16. This electronic part offers high-quality output due to its 8 channels. In the case of a voltage supply of 2.3V volts, the electrical part can be powered up and run. An electrical component like this is included in the 16 series. There are 1 circuits in this switch device. Try searching with 74LV4051 if you're looking for variants. The internal resistance of this digital multiplexer is 75Ohm. Datasheets for functions of 16 pins are available. Theswitch device is a typical Multiplexer or Switches. A voltage higher than 5.5V should not normally be supplied to the switches. The digital multiplexer has a low cost Single supply. It is recommended to use 2V as the lowest voltage for the electrical part. The analogue multiplexer could operate on 20μA current. Using a single voltage supply, this switch device consumes 2V~5.5V volts. A 8 input needs to be operated. In 35MHz-bandwidths, data can be transferred.