DG787DQ-T1-E3 Overview
Presented in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width), this electrical component is convenient for overseas shipping. High reliability is ensured by the advanced packaging method Tape & Reel (TR). Surface Mount is where this multiplexer is located. Multiplexer and demultiplexer circuits have a number 2:1. Increasing operating temperature to around -40°C~85°C TA. Totally, there are 10 terminations. A total of 10 pins are injected into the electrical part body. A SPDT switching circuit is used for these analog switches. The circuits in this analogue multiplexer number 2. Using the DG787 search parameter, you can discover variants of the switch. In this multiplexer, the internal resistance is 2.9Ohm. For details about the functions of 10 pins, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. The digital multiplexer has a low cost Single supply. 1.8V is the lowest voltage the electrical component should receive. For this digital switch to work, 1μA current would suffice. An analogue multiplexer drains from a single voltage supply at 1.8V~5.5V. Putting voltage greater than 1μA on the multiplexer may cause damage. It is integrated with a SPST analog IC.
DG787DQ-T1-E3 Features
Switch Circuit: SPDT
1μA Supply Current
-3db Bandwidth: 300MHz
DG787DQ-T1-E3 Applications
There are a lot of Vishay Siliconix
DG787DQ-T1-E3 Analog Switches & Multiplexers ICs applications.
- Precision data acquisition
- Battery-powered systems
- Sample-and-hold systems
- Communication systems
- Data Acquisition Systems
- Relay Replacement
- Battery Powered Systems
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- New designs requiring multiplexer functions
- Cellular phones
