SN74LS175DG4 Overview
The item is packaged in SOICcases. There is a TTLoutput configured with it. In total, it contains 1 elements. A total of 16 terminations have been made. A voltage of 5V is used to power it. An electronic device belonging to the family LScan be found here. There is an electronic part mounted in the way of Surface Mount. As you can see from the design, it has pins with 16. There is a clock edge trigger type of Positive Edgeon this device. The D latch operates on 5V volts. For high efficiency, the supply voltage should be set to 5V. -400μAis set as the high level output current. There is no low level output current set at 8mA. Temperatures below 70°Care ideal for operating. Temperatures above 0°Cshould be used. The minimum voltage required for operation is 4.75V. 5.25Vis the maximum supply voltage supported by it. This can be achieved at a frequency of 40MHz. It uses the logic IC D FLIP-FLOP. There are 1 functions associated with the JK flip flop. 16pins are provided on the D latch. It features maximum design flexibility due to the 8mA output current.
SN74LS175DG4 Features
16 pins
5V power supplies
1 Functions
16 pin count
SN74LS175DG4 Applications
There are a lot of Texas Instruments
SN74LS175DG4 Flip Flops applications.
- Data transfer
- Latch
- Registers
- Memory
- Frequency division
- Memory
- Event Detectors
- Data Synchronizers
- Asynchronous counter
- Modulo – n – counter
