SN74ACT74PWRG4 Overview
The flip flop is packaged in a case of TSSOP. You can find it in the Tape & Reel (TR)package. It is configured with Differentialas an output. It is configured with a trigger that uses a value of Positive Edge. Surface Mountmounts this electrical part. A voltage of 4.5 V ~ 5.5 Vis required for its operation. Temperature is set to -40°C ~ 85°C (TA). It belongs to the type D-Typeof flip flops. In FPGA terms, D flip flop is a type of 74ACTseries FPGA. Its output frequency should not exceed 210MHz Hz. D latch consists of 2 elements. As a result, it consumes 2µA quiescent current. Terminations are 14. Members of the 74ACT74family make up this object. The power source is powered by 5V. A JK flip flop with a 3pFfarad input capacitance is used here. Electronic devices of this type belong to the ACTfamily. Electronic part Surface Mountis mounted in the way. With its 14pins, it is designed to work with most electronic flip flops. In this device, the clock edge trigger type is Positive Edge. The design is based on 1bits. Due to its reliability, this T flip flop is well suited for TAPE AND REEL. The D latch runs on a voltage of 5V volts. In order to ensure high efficiency, the supply voltage should remain at 5V. This input has 1lines in it. It is set to -24mAfor the high level output current. It is set to 24mAfor the low level output current. If the operating temperature is lower than 85°C, it is recommended. It should be higher than -40°Cwhen the system is operating. Normally, it operates with a voltage of 4.5VV as its minimum supply voltage. It supports a maximum supply voltage of 5.5V volts. This frequency can be achieved 210MHz. In this case, it uses a D FLIP-FLOP logic IC. It is equipped with 2 functions . The D latch is equipped with 14 pins. As a result of its output current of 24mA, it is very flexible in terms of design.
SN74ACT74PWRG4 Features
Tape & Reel (TR) package
74ACT series
14 pins
1 Bits
5V power supplies
2 Functions
14 pin count
SN74ACT74PWRG4 Applications
There are a lot of Texas Instruments
SN74ACT74PWRG4 Flip Flops applications.
- Data storage
- Data transfer
- Latch
- Registers
- Memory
- Frequency division
- Memory
- Event Detectors
- Data Synchronizers
- Asynchronous counter
