SN74LS173ADR Overview
16-SOIC (0.154, 3.90mm Width)is the packaging method. It is contained within the Tape & Reel (TR)package. T flip flop uses Tri-State, Non-Invertedas the output. The trigger it is configured with uses Positive Edge. Surface Mountis in the way of this electric part. With a supply voltage of 4.75V~5.25V volts, it operates. A temperature of 0°C~70°C TAis used in the operation. This electronic flip flop is of type D-Type. In terms of FPGAs, it belongs to the 74LS series. It should not exceed 50MHzin terms of its output frequency. A total of 1 elements are present. There are 16 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. You can search similar parts based on 74LS173. A voltage of 5V provides power to the D latch. In terms of electronic devices, this device belongs to the LSfamily of devices. The electronic part is mounted in the way of Surface Mount. A total of 16pins are provided on this board. Its clock edge trigger type is Positive Edge. The RS flip flops belongs to FF/Latches base part number. In light of its reliable performance, this T flip flop is well suited for TAPE AND REEL. A total of 5V power supplies are needed to run it. The 24mA output current allows it to be designed with the greatest amount of flexibility. There are 2 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. Additionally, there are WITH HOLD MODE; WITH DUAL OUTPUT ENABLE; DISABLE TIME CL = 5PF on the electronic flip flop that can be referred to.
SN74LS173ADR Features
Tape & Reel (TR) package
74LS series
16 pins
5V power supplies
SN74LS173ADR Applications
There are a lot of Texas Instruments SN74LS173ADR Flip Flops applications.
- Automotive
- Safety Clamp
- Dynamic threshold performance
- Convert a momentary switch to a toggle switch
- Test & Measurement
- Event Detectors
- ESCC
- Data transfer
- Shift registers
- Buffered Clock
