74AC574TTR Overview
It is embeded in 20-TSSOP (0.173, 4.40mm Width) case. It is contained within the Tape & Reel (TR)package. As configured, the output uses Tri-State, Non-Inverted. The trigger configured with it uses Positive Edge. Surface Mountis occupied by this electronic component. A supply voltage of 2V~6V is required for operation. It is operating at a temperature of -55°C~125°C TA. D-Typedescribes this flip flop. This type of FPGA is a part of the 74AC series. A frequency of 250MHzshould not be exceeded by its output. The list contains 1 elements. As a result, it consumes 4μA quiescent current and is not affected by external forces. There have been 20 terminations. If you search by 74AC574, you will find similar parts. A voltage of 3.3V is used as the power supply for this D latch. The input capacitance of this T flip flop is 4pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. It belongs to the family of electronic devices known as AC. It is mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. This device has the clock edge trigger type of Positive Edge. It is included in FF/Latches. There are 8bits in its design. It reaches 6Vwhen the maximum supply voltage (Vsup) is applied. The supply voltage (Vsup) should be kept above 2V for normal operation. Despite its superior flexibility, it relies on 8 circuits to achieve it. A reliable performance of this D flip flop makes it well suited for use in TAPE AND REEL. The flip flop has 2embedded ports. In order for the chip to function, it has 3output lines.
74AC574TTR Features
Tape & Reel (TR) package
74AC series
20 pins
8 Bits
74AC574TTR Applications
There are a lot of STMicroelectronics 74AC574TTR Flip Flops applications.
- Computers
- Pattern generators
- Power down protection
- Circuit Design
- Safety Clamp
- Counters
- Single Down Count-Control Line
- Cold spare funcion
- Balanced Propagation Delays
- Dynamic threshold performance
