SN74HCT574PW Overview
As a result, it is packaged as 20-TSSOP (0.173, 4.40mm Width). There is an embedded version in the package Tube. It is configured with Tri-State, Non-Invertedas an output. It is configured with a trigger that uses Positive Edge. The electronic part is mounted in the way of Surface Mount. It operates with a supply voltage of 4.5V~5.5V. The operating temperature is -40°C~85°C TA. It belongs to the type D-Typeof flip flops. It belongs to the 74HCTseries of FPGAs. Its output frequency should not exceed 40MHz Hz. A total of 1 elements are present. As a result, it consumes 8μA of quiescent current without being affected by external factors. Currently, there are 20 terminations. Members of the 74HCT574family make up this object. It is powered by a voltage of 5V . This T flip flop has a capacitance of 3pF farads at the input. In this case, the D flip flop belongs to the HCTfamily. A part of the electronic system is mounted in the way of Surface Mount. A total of 20pins are provided on this board. A Positive Edgeclock edge trigger is used in this device. This part is included in FF/Latches. The design is based on 8bits. Using 8 circuits, it is highly flexible. There are 5V power supplies attached to it. This D flip flop is equipped with 0 ports. For high efficiency, the supply voltage should be kept at 5V. Featuring the maximum design flexibility, it has an output current of 6mA . Currently, there are 3 lines of input.
SN74HCT574PW Features
Tube package
74HCT series
20 pins
8 Bits
5V power supplies
SN74HCT574PW Applications
There are a lot of Texas Instruments SN74HCT574PW Flip Flops applications.
- Storage Registers
- Matched Rise and Fall
- QML qualified product
- Event Detectors
- Common Clocks
- Computers
- Frequency division
- Counters
- Buffer registers
- ATE
