Name: SN74HC4066NSR
Brand: Texas Instruments
SKU: SN74HC4066NSR
Price: 0.21000 USD
Availability: InStock

new-10%

SN74HC4066NSR

Manufacturer part number:SN74HC4066NSR

Manufacturer:Texas Instruments

Description:31ns, 34ns SPST - NO 30Ohm Typ DUAL Analog Switches MAKE-BEFORE-BREAK 74HC4066 14 Pins 100nA 4.5V 14-SOIC (0.209, 5.30mm Width)

Case Package:SOT-23

Datasheet:SN74HC4066NSR Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	14-SOIC (0.209, 5.30mm Width)
Number of Pins	14
Weight	208.312296mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
ECCN Code	EAR99
Resistance	30Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	4.5V
Terminal Pitch	1.27mm
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	74HC4066
Output	SEPARATE OUTPUT
Pin Count	14
Qualification Status	Not Qualified
Number of Channels	4
Max Supply Voltage	6V
Min Supply Voltage	2V
Operating Supply Current	2μA
Max Supply Current	2μA
Throw Configuration	SPST
Propagation Delay	15 ns
Turn On Delay Time	180 ns
Supply Type	Single
Bandwidth	30MHz
Turn-Off Delay Time	200 ns
On-State Resistance (Max)	30Ohm Typ
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	42 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	0.5pF 9pF
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	31ns, 34ns
Crosstalk	-45dB @ 1MHz
Switching	MAKE-BEFORE-BREAK
Switch-on Time-Max	36ns
Voltage - Supply, Single (V+)	2V~6V
Normal Position	NO
Height	2mm
Length	10.3mm
Width	5.3mm
Thickness	1.95mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

SN74HC4066NSR Product Details

SN74HC4066NSR Overview

The electrical component comes in 14-SOIC (0.209, 5.30mm Width) packaging, which makes it convenient to ship overseas. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. In Surface Mount, you'll find this switch device. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Operating temperature around -40°C~85°C TA extended. In total, 14 terminations have occurred. A electrical component with 4 channels is capable of high-quality output. When the electronic component is given a voltage of 4.5V, it should be turned on and run. Into the electrical component body are injected 14 pins. On the other hand, analog switches can be constructed using SPST - NO switching circuits. Look for analog switch ic variants by searching with 74HC4066. A 30Ohm internal resistance characterizes this multiplexer. The datasheets for the 14 pins explain the functions. The analog multiplexer shown here is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 6V. A analog switch ic that has a cost-effective Single supply type. It is recommended to use 2V as the lowest voltage for the electrical part. The analogue multiplexer could operate on 2μA current. Analogue multiplexers require a 2V~6V voltage to drain from a single voltage supply. A voltage higher than 2μA may cause damage to the switch multiplexer. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer. It is possible to transfer data over a 30MHz-bandwidth.