SN74AC74DG4 Overview
It is packaged in the way of SOIC. D latch consists of 2 elements. There are 14 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It is powered from a supply voltage of 3V. This D flip flop belongs to the family of AC. This electronic part is mounted in the way of Surface Mount. It is designed with 14 pins. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. This part is included in FF/Latches. This D flip flop is well suited for TUBE based on its reliable performance. It operates from 3.3/5V power supplies. There are 4 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. The high level output current is set to -24mA. The low level output current is set to 24mA. The operating temperature should be lower than 85°C. The operating temperature should be higher than -40°C. It operates with the minimal supply voltage of 2V. It supports the maximal supply voltage of 6V. The frequency that can be achieved is 160MHz. The logic IC it adopts is D FLIP-FLOP. It is equipped with 2 Functions . It is equipped with 14 pin count. The output current of 24mA makes it feature maximum design flexibility.
SN74AC74DG4 Features
14 pins
3.3/5V power supplies
2 Functions
14 pin count
SN74AC74DG4 Applications
There are a lot of Texas Instruments
SN74AC74DG4 Flip Flops applications.
- Digital electronics systems
- Computers
- Communications
- Counters
- Frequency Dividers
- Shift Registers
- Storage Registers
- Bounce elimination switch
- Data storage
- Data transfer
