Welcome to Hotenda.com Online Store!

logo
userjoin
Home

SN74CBTD3306PWG4

SN74CBTD3306PWG4

SN74CBTD3306PWG4

Texas Instruments

8 Terminations 8 Pin Signal switch 2 Functions Min 4.5V V Max 5.5V V

SOT-23

SN74CBTD3306PWG4 Datasheet PDF

non-compliant

Technical Specifications

Parameter NameValue
TypeParameter
Lifecycle Status ACTIVE (Last Updated: 1 week ago)
Mount Surface Mount
Package / Case TSSOP
Number of Pins 8
Weight 39.008944mg
PackagingRail/Tube
JESD-609 Code e4
Pbfree Code yes
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Resistance 7Ohm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Max Operating Temperature85°C
Min Operating Temperature -40°C
Subcategory Bus Driver/Transceivers
Technology CMOS
Terminal Position DUAL
Terminal FormGULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 5V
Terminal Pitch0.65mm
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Pin Count8
Qualification StatusNot Qualified
Operating Supply Voltage5V
Power Supplies5V
Temperature GradeINDUSTRIAL
Number of Channels 2
Max Supply Voltage5.5V
Min Supply Voltage4.5V
Load Capacitance50pF
Number of Ports2
Nominal Supply Current1.5mA
Current - Output 64mA
Number of Bits 1
Propagation Delay250 ps
Quiescent Current1.5mA
Turn On Delay Time5.4 ns
Family CBT/FST/QS/5C/B
Output Characteristics 3-STATE
Supply Type Single
Bandwidth 20MHz
Output Polarity TRUE
Logic IC Type BUS DRIVER
High Level Output Current-128mA
Low Level Output Current128mA
Control Type ENABLE LOW
Count Direction BIDIRECTIONAL
Translation N/A
Height 1.2mm
Length 3mm
Width 4.4mm
Thickness 1mm
RoHS StatusRoHS Compliant
Lead Free Lead Free
In-Stock:4838 items

SN74CBTD3306PWG4 Product Details

SN74CBTD3306PWG4 Overview


Due to the fact that it is provided in the TSSOP, digital switch allows the board to be compacted.As a result, it is packaged in a way that is referred to as Rail/Tube.It is designed with 8 terminations as part of its basic configuration.For multiplexer's system, a voltage of 5V is supplied.This turn signal switch consists of 8 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.In this case, the supply type is Single.A configuration of 8 pins is used.The mounting point is Surface Mount.I would like to refer to the logic switch as a member of the CBT/FST/QS/5C/B family.As a result, signal multiplexer provides a total of 1 bits.During mux switch's normal operation, 5V is provided with a power supply.This is an the digital switch ic that is classified as Bus Driver/Transceivers.Without external influences, it consumes 1.5mA current of multiplexer ic.With a supply voltage of 5V, reliable performance of the multiplexers can be achieved.A resistance of 2 is used to operate the signal switching.The resistance of the signal switching is 7Ohm.A total of 2 transmission channels are available in the turn signal switch's circuit.Signal switch operation at 85°C temperature is acceptable.It is recommended that the minimal operating temperature of the multiplexer be maintained at -40°C.Upon compliance with the applicable device specifications, the device will operate at the maximum supply voltage of 5.5V.Device specifications require that the minimum supply voltage is 4.5V.It uses the logic IC BUS DRIVER as its core logic unit.

SN74CBTD3306PWG4 Features


Supplied in the TSSOP package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
BUS DRIVER as the logic IC


SN74CBTD3306PWG4 Applications


There are a lot of Texas Instruments
SN74CBTD3306PWG4 Signal Switches / Multiplexers / Decoders applications.


  • D/A converters
  • Implementing boolean functions with multiple variables
  • Data collection system
  • Audio transmission
  • Video transmission
  • Image transmission
  • Recording transmission
  • Combinational circuit
  • Logic gates for other digital devices
  • Signal router

Get Subscriber

Enter Your Email Address, Get the Latest News