Welcome to Hotenda.com Online Store!

logo
userjoin
Home

74CBTLV3126DGVRE4

74CBTLV3126DGVRE4

74CBTLV3126DGVRE4

Texas Instruments

14 Terminations 14 Pin Signal switch 1 Functions Min 2.3V V Max 3.6V V

SOT-23

74CBTLV3126DGVRE4 Datasheet PDF

non-compliant

Technical Specifications

Parameter NameValue
TypeParameter
Contact PlatingGold
Mount Surface Mount
Package / Case TFSOP
Number of Pins 14
Weight 41.787197mg
PackagingTape and Reel
JESD-609 Code e4
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 14
Resistance 7Ohm
Max Operating Temperature85°C
Min Operating Temperature -40°C
Additional FeatureBUS SWITCH
Subcategory Bus Driver/Transceivers
Technology CMOS
Terminal Position DUAL
Terminal FormGULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 2.5V
Pin Count14
Operating Supply Voltage3.3V
Temperature GradeINDUSTRIAL
Number of Channels 4
Max Supply Voltage3.6V
Min Supply Voltage2.3V
Number of Ports2
Nominal Supply Current10μA
Current - Output 64mA
Number of Bits 4
Propagation Delay250 ps
Quiescent Current10μA
Turn On Delay Time4.8 ns
Family CBTLV/3B
Output Characteristics 3-STATE
Supply Type Single
Bandwidth 200MHz
Output Polarity TRUE
Logic IC Type BUS DRIVER
High Level Output Current-128mA
Low Level Output Current128mA
Height Seated (Max) 1.2mm
Radiation HardeningNo
RoHS StatusRoHS Compliant
Lead Free Lead Free
In-Stock:4950 items

74CBTLV3126DGVRE4 Product Details

74CBTLV3126DGVRE4 Overview


Due to the fact that it is provided in the TFSOP, digital switch allows the board to be compacted.As a result, it is packaged in a way that is referred to as Tape and Reel.It is designed with 14 terminations as part of its basic configuration.For multiplexer's system, a voltage of 2.5V is supplied.This turn signal switch consists of 14 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.In this case, the supply type is Single.A configuration of 14 pins is used.The mounting point is Surface Mount.I would like to refer to the logic switch as a member of the CBTLV/3B family.As a result, signal multiplexer provides a total of 4 bits.This is an the digital switch ic that is classified as Bus Driver/Transceivers.Without external influences, it consumes 10μA current of multiplexer ic.With a supply voltage of 3.3V, reliable performance of the multiplexers can be achieved.A resistance of 2 is used to operate the signal switching.The resistance of the signal switching is 7Ohm.A total of 4 transmission channels are available in the turn signal switch's circuit.Signal switch operation at 85°C temperature is acceptable.It is recommended that the minimal operating temperature of the multiplexer be maintained at -40°C.Upon compliance with the applicable device specifications, the device will operate at the maximum supply voltage of 3.6V.Device specifications require that the minimum supply voltage is 2.3V.The characteristics of BUS SWITCH are also improved.It uses the logic IC BUS DRIVER as its core logic unit.

74CBTLV3126DGVRE4 Features


Supplied in the TFSOP package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
BUS SWITCH
BUS DRIVER as the logic IC


74CBTLV3126DGVRE4 Applications


There are a lot of Texas Instruments
74CBTLV3126DGVRE4 Signal Switches / Multiplexers / Decoders applications.


  • D/A converters
  • Implementing boolean functions with multiple variables
  • Data collection system
  • Audio transmission
  • Video transmission
  • Image transmission
  • Recording transmission
  • Combinational circuit
  • Logic gates for other digital devices
  • Signal router

Get Subscriber

Enter Your Email Address, Get the Latest News