Welcome to Hotenda.com Online Store!

logo
userjoin
Home

SN74CBT3306DE4

SN74CBT3306DE4

SN74CBT3306DE4

Texas Instruments

8 Terminations 8 Pin Signal switch 2 Functions Min 4V V Max 5.5V V

SOT-23

SN74CBT3306DE4 Datasheet PDF

non-compliant

Technical Specifications

Parameter NameValue
TypeParameter
Mount Surface Mount
Package / Case SOIC
Number of Pins 8
Weight 72.603129mg
PackagingRail/Tube
JESD-609 Code e4
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
Resistance 7Ohm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Max Operating Temperature85°C
Min Operating Temperature -40°C
Additional FeatureBUS SWITCH
Subcategory Bus Driver/Transceivers
Technology CMOS
Terminal Position DUAL
Terminal FormGULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 5V
Pin Count8
Operating Supply Voltage5V
Power Supplies5V
Temperature GradeINDUSTRIAL
Number of Channels 2
Max Supply Voltage5.5V
Min Supply Voltage4V
Load Capacitance50pF
Number of Ports2
Nominal Supply Current3μA
Current - Output 64mA
Number of Bits 1
Propagation Delay5.6 ns
Quiescent Current3μA
Turn On Delay Time5.6 ns
Family CBT/FST/QS/5C/B
Output Characteristics 3-STATE
Supply Type Single
Bandwidth 200MHz
Output Polarity TRUE
Logic IC Type BUS DRIVER
High Level Output Current-128mA
Low Level Output Current128mA
Length 4.9mm
Height Seated (Max) 1.75mm
Radiation HardeningNo
RoHS StatusRoHS Compliant
Lead Free Lead Free
In-Stock:3626 items

SN74CBT3306DE4 Product Details

SN74CBT3306DE4 Overview


Providing this information in the SOIC enables digital switch board space to be saved.The package is in the form of Rail/Tube.There is a design for terminating 8 as part of its basic configuration.The multiplexer's system works with 5V voltage.In this turn signal switch, there are 8 component pins.Conductors terminate at GULL WING in this design.The supply type of this multiplexer ic is Single.This multiplexer ic is configured with 8 pins.It is positioned in the direction of Surface Mount.In the CBT/FST/QS/5C/B family, the logic switch is included.The multiplexer ic provides 1 bits.Normally, 5V is powered by a battery.This is a signal switch that is categorized as Bus Driver/Transceivers.In the absence of external influences, it consumes 3μA current of multiplexer ic.The performance of the multiplexers of a system can be reliably achieved with a supply voltage of 5V.2 is the resistance at which it operates.This signal switching operates at a resistance of 7Ohm.A total of 2 channels are used for transmission in the turn signal switch's circuit.85°C is an acceptable maximum temperature for this signal switch.A temperature of the multiplexer of -40°C should be maintained for minimal operation.Based on the device specifications, the signal switches is designed to operate at 5.5V maximum supply voltage.A minimum supply voltage of 4V is specified for the digital swith by its applicable specification.In addition, BUS SWITCH exhibits improved characteristics.It uses IC BUS DRIVER for its logic.

SN74CBT3306DE4 Features


Supplied in the SOIC package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
BUS SWITCH
BUS DRIVER as the logic IC


SN74CBT3306DE4 Applications


There are a lot of Texas Instruments
SN74CBT3306DE4 Signal Switches / Multiplexers / Decoders applications.


  • Time division multiplexing system
  • Frequency multiplexing system
  • A/D converters
  • D/A converters
  • Implementing boolean functions with multiple variables
  • Data collection system
  • Audio transmission
  • Video transmission
  • Image transmission
  • Recording transmission

Get Subscriber

Enter Your Email Address, Get the Latest News