SN74CBT3126DBQRG4 Overview
Providing this information in the SSOP enables digital switch board space to be saved.The package is in the form of Tape and Reel.There is a design for terminating 16 as part of its basic configuration.The multiplexer's system works with 5V voltage.In this turn signal switch, there are 16 component pins.Conductors terminate at GULL WING in this design.The supply type of this multiplexer ic is Single.This multiplexer ic is configured with 16 pins.It is positioned in the direction of Surface Mount.In the CBT/FST/QS/5C/B family, the logic switch is included.The multiplexer ic provides 4 bits.Normally, 5V is powered by a battery.In the absence of external influences, it consumes 3μA current of multiplexer ic.The performance of the multiplexers of a system can be reliably achieved with a supply voltage of 5V.TR is used to package the switches.2 is the resistance at which it operates.This signal switching operates at a resistance of 7Ohm.A total of 4 channels are used for transmission in the turn signal switch's circuit.85°C is an acceptable maximum temperature for this signal switch.A temperature of the multiplexer of -40°C should be maintained for minimal operation.Based on the device specifications, the signal switches is designed to operate at 5.5V maximum supply voltage.A minimum supply voltage of 4V is specified for the digital swith by its applicable specification.It uses IC BUS DRIVER for its logic.
SN74CBT3126DBQRG4 Features
Supplied in the SSOP package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
BUS DRIVER as the logic IC
SN74CBT3126DBQRG4 Applications
There are a lot of Texas Instruments
SN74CBT3126DBQRG4 Signal Switches / Multiplexers / Decoders applications.
- Time division multiplexing system
- Frequency multiplexing system
- A/D converters
- D/A converters
- Implementing boolean functions with multiple variables
- Data collection system
- Audio transmission
- Video transmission
- Image transmission
- Recording transmission
