SN74CB3Q3251PWR Overview
Due to the fact that it is provided in the 16-TSSOP (0.173, 4.40mm Width), digital switch allows the board to be compacted.It is packaged in the way of Tape & Reel (TR).For mounting, digital switch ic uses the method Surface Mount.The analog IC in the multiplexers is identified as Multiplexer/Demultiplexer.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.When digital controlled switch operates at 2.3V~3.6V, designers are provided with a greater degree of flexibility.Multiplexers from the 74CB series can be used in a wide range of applications.The basic configuration includes 16 terminations.The base part number is 74CB3Q3251, so you can find its logic switch related parts using that number.The voltage supplied for multiplexer's system is 2.5V.multiplexer's systemCurrently, this turn signal switch has a total of 16 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.Single is employed as its supply type.It is configured with 16 pins.In the CB3Q/3VH/3C/2B family, the logic switch is included.In the signal multiplexer, there are 8 bits available.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 2.3V.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 3.6V.There is a power supply provided for the mux switch's normal operation of 2.5/3.3V.The turn signal switch operates with 8 outputs.In electronic terms, the digital switch ic is classified as Other Logic ICs.It consumes 4mA current of multiplexer ic since it is not affected by external factors.The switches is packaged according to the way of TR.With a resistance of 10Ohm, it operates.To ensure that the digitalswitch performs properly, 1 circuits are formed.It is possible to maintain stability of the multiplexers when the load receives a supply voltage of 4mA.
SN74CB3Q3251PWR Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
Operating with the supply current of 4mA
SN74CB3Q3251PWR Applications
There are a lot of Texas Instruments SN74CB3Q3251PWR Signal Switches / Multiplexers / Decoders applications.
- Data bus control
- Paper plants
- Medical industry
- GLAN
- Control unit of Central Processing unit (CPU)
- Relay
- Idle motor
- A/D converters
- Injectors
- Audio transmission
