Name: SN74BCT574NSRG4
Brand: Texas Instruments
SKU: SN74BCT574NSRG4
Availability: InStock

new-10%

SN74BCT574NSRG4

Manufacturer part number:SN74BCT574NSRG4

Manufacturer:Texas Instruments

Description:4.5V~5.5V 77MHz 8 Bit D-Type Flip Flop DUAL 74BCT574 20 Pins 8mA 74BCT Series 20-SOIC (0.209, 5.30mm Width)

Case Package:SOT-23

Datasheet:SN74BCT574NSRG4 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	20-SOIC (0.209, 5.30mm Width)
Number of Pins	20
Weight	266.712314mg
Operating Temperature	0°C~70°C TA
Packaging	Tape & Reel (TR)
Series	74BCT
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	20
Type	D-Type
Subcategory	FF/Latches
Packing Method	TAPE AND REEL
Technology	BICMOS
Voltage - Supply	4.5V~5.5V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	NOT SPECIFIED
Supply Voltage	5V
[email protected] Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	74BCT574
Function	Standard
Qualification Status	Not Qualified
Output Type	Tri-State, Non-Inverted
Number of Elements	1
Polarity	Non-Inverting
Supply Voltage-Max (Vsup)	5.5V
Power Supplies	5V
Supply Voltage-Min (Vsup)	4.5V
Load Capacitance	50pF
Number of Ports	2
Output Current	64mA
Number of Bits	8
Clock Frequency	77MHz
Propagation Delay	8.6 ns
Turn On Delay Time	6.5 ns
Family	BCT/FBT
Logic Function	D-Type, Flip-Flop
Current - Quiescent (Iq)	8mA
Output Characteristics	3-STATE
Current - Output High, Low	15mA 64mA
Max I(ol)	0.064 A
Max Propagation Delay @ V, Max CL	8.6ns @ 5V, 50pF
Trigger Type	Positive Edge
Input Capacitance	5.5pF
Number of Input Lines	8
Clock Edge Trigger Type	Positive Edge
Max [email protected]	77000000Hz
Height Seated (Max)	2mm
Width	5.3mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

SN74BCT574NSRG4 Product Details

SN74BCT574NSRG4 Overview

The flip flop is packaged in a case of 20-SOIC (0.209, 5.30mm Width). As part of the package Tape & Reel (TR), it is embedded. Currently, the output is configured to use Tri-State, Non-Inverted. The trigger configured with it uses Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 4.5V~5.5V. It is operating at a temperature of 0°C~70°C TA. It belongs to the type D-Typeof flip flops. FPGAs belonging to the 74BCTseries contain this type of chip. Its output frequency should not exceed 77MHz. In total, it contains 1 elements. There is 8mA quiescent consumption. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. If you search by 74BCT574, you will find similar parts. A voltage of 5V is used to power it. The input capacitance of this JK flip flopis 5.5pF farads. Devices in the BCT/FBTfamily are electronic devices. There is an electronic component mounted in the way of Surface Mount. 20pins are included in its design. There is a clock edge trigger type of Positive Edgeon this device. The part is included in FF/Latches. An electronic part designed with 8bits is used in this application. As soon as Vsup reaches 5.5V, the maximum supply voltage is reached. The supply voltage (Vsup) should be maintained above 4.5V for normal operation. In view of its reliability, this D flip flop is a good fit for TAPE AND REEL. A total of 5V power supplies are needed to run it. A D flip flop with 2embedded ports is available. As a result of its output current of 64mA, it is very flexible in terms of design. The number of input lines is 8.