SN74BCT29821DW Overview
The flip flop is packaged in a case of 24-SOIC (0.295, 7.50mm Width). There is an embedded version in the package Tube. T flip flop uses Tri-State, Non-Invertedas the output. Positive Edgeis the trigger it is configured with. It is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. It is operating at a temperature of 0°C~70°C TA. This electronic flip flop is of type D-Type. In this case, it is a type of FPGA belonging to the 74BCT series. It should not exceed 125MHzin its output frequency. The list contains 1 elements. There is 10mA quiescent consumption. Terminations are 24. The object belongs to the 74BCT29821 family. It is powered by a voltage of 5V . This T flip flop has a capacitance of 5.5pF farads at the input. This D flip flop belongs to the family of BCT/FBT. There is an electronic part that is mounted in the way of Surface Mount. It is designed with 24 pins. This device has the clock edge trigger type of Positive Edge. This device is part of the FF/Latchesbase part number family. It runs on 5Vvolts of power. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. In order to ensure high efficiency, the supply voltage should remain at 5V. Currently, there are 3 input lines present.
SN74BCT29821DW Features
Tube package
74BCT series
24 pins
5V power supplies
SN74BCT29821DW Applications
There are a lot of Texas Instruments SN74BCT29821DW Flip Flops applications.
- Digital electronics systems
- Single Up Count-Control Line
- Test & Measurement
- Counters
- Single Down Count-Control Line
- Storage registers
- Reduced system switching noise
- Modulo – n – counter
- EMI reduction circuitry
- Cold spare funcion
